TEAC LM-8ST LM-8ST Owners Manual - Page 8

Specifications

Page 8 highlights

4 - Specifications Audio inputs and outputs MIC input Connector Input impedance Nominal input level Maximum input level XLR-3-31 (1: GND, 2: HOT, 3: COLD) 2.4 kΩ -58 dBu (1 mV) - -12 dBu (195 mV) +10 dBu (2.45 V) STEREO INPUT Connectors Input impedance Nominal input level Maximum input level 6.3 mm (1/4") TRS Standard phone jacks (Tip: HOT, Ring: COLD, Sleeve: GND) 16 kΩ +4 dBu (1.23 V) +24 dBu (12.3 V) MASTER BUSS IN Connectors Input impedance Nominal input level Maximum input level 6.3 mm (1/4") TRS Standard phone jacks (Tip: HOT, Ring: COLD, Sleeve: GND) 16 kΩ +4 dBu (1.23 V) +24 dBu (12.3 V) ST 1and ST 2/AUX OUTPUTS Connectors XLR-3-32 (1: GND, 2: HOT, 3: COLD) Output impedance 94Ω Nominal output level +4 dBu (1.23 V) Maximum output level +24 dBu (12.3 V) ST 1 and ST 2/AUX OUTPUTS Connectors RCA pin jacks Output impedance 200Ω Nominal output level -10 dBV (0.3V) Maximum output level +10 dBV (3.16 V) BUSS OUT Connectors 6.3 mm (1/4") TRS Standard phone jacks (Tip: HOT, Ring: COLD, Sleeve: GND) Output impedance 94Ω Nominal output level +4 dBu (1.23 V) Maximum output level +24 dBu (12.3 V) PHONES outputs Connectors Maximum output level 6.3 mm (1/4") Standard stereo phone jacks and 3.5 mm (1/8") stereo mini jack 250 mW + 250 mW (32Ω) Audio performance Frequency response S/N ratio THD Channel separation Crosstalk Power Power consumption Dimensions (WHD) Weight 20 Hz-50 kHz, ±3 dB (PHONES outputs) 10 Hz-100 kHz, ±3 dB (Each BUSS output) 80 dB or greater (PHONES outputs, A-WTD, 20 kHz LPF) 80 dB or greater (Each BUSS output, A-WTD, 20 kHz LPF) 0.07% or less (PHONES outputs, when outputting 100 mW + 100 mW (32 Ω), 20Hz HPF and 20 kHz LPF) 0.03% or less (each BUSS output, 20 Hz HPF and 20 kHz LPF) 50 dB or greater (PHONES outputs, A-WTD, 20 kHz LPF, 1 kHz nominal input and output, 32Ω termination) 70 dB or greater (Each BUSS outputs, A-WTD, 20 kHz LPF, 1 kHz nominal input and output, 600Ω termination) 65 dB or greater (Each BUSS outputs, A-WTD, 20 kHz LPF, 1 kHz nominal input and output, 600Ω termination) AC 100-240V, 50-60 Hz 15 W 482 x 44 x 280 mm 18.98 x 1.73 x 11.02 in. 3.8 kg/8.378 lb 8 TASCAM LM-8ST

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

8
TASCAM
LM-8ST
Audio inputs and outputs
MIC input
Connector
XLR-3-31
(1: GND, 2: HOT, 3: COLD)
Input impedance
2.4 kΩ
Nominal input level
–58 dBu (1 mV) - –12 dBu (195
mV)
Maximum input level
+10 dBu (2.45 V)
STEREO INPUT
Connectors
6.3 mm (1/4”) TRS Standard
phone jacks
(Tip: HOT, Ring: COLD, Sleeve:
GND)
Input impedance
16 kΩ
Nominal input level
+4 dBu (1.23 V)
Maximum input level
+24 dBu (12.3 V)
MASTER BUSS IN
Connectors
6.3 mm (1/4”) TRS Standard
phone jacks
(Tip: HOT, Ring: COLD, Sleeve:
GND)
Input impedance
16 kΩ
Nominal input level
+4 dBu (1.23 V)
Maximum input level
+24 dBu (12.3 V)
ST 1and ST 2/AUX OUTPUTS
Connectors
XLR-3-32
(1: GND, 2: HOT, 3: COLD)
Output impedance
94Ω
Nominal output level
+4 dBu (1.23 V)
Maximum output level
+24 dBu (12.3 V)
ST 1 and ST 2/AUX OUTPUTS
Connectors
RCA pin jacks
Output impedance
200Ω
Nominal output level
–10 dBV (0.3V)
Maximum output level
+10 dBV (3.16 V)
BUSS OUT
Connectors
6.3 mm (1/4”) TRS Standard
phone jacks
(Tip: HOT, Ring: COLD, Sleeve:
GND)
Output impedance
94Ω
Nominal output level
+4 dBu (1.23 V)
Maximum output level
+24 dBu (12.3 V)
PHONES outputs
Connectors
6.3 mm (1/4”) Standard
stereo phone jacks and 3.5
mm (1/8”) stereo mini jack
Maximum output level
250 mW + 250 mW (32Ω)
Audio performance
Frequency response
20 Hz–50 kHz, ±3 dB (PHONES
outputs)
10 Hz–100 kHz, ±3 dB (Each
BUSS output)
S/N ratio
80 dB or greater (PHONES
outputs, A-WTD, 20 kHz LPF)
80 dB or greater (Each BUSS
output, A-WTD, 20 kHz LPF)
THD
0.07% or less (PHONES outputs,
when outputting 100 mW + 100
mW (32 Ω), 20Hz HPF and 20
kHz LPF)
0.03% or less (each BUSS
output, 20 Hz HPF and 20 kHz
LPF)
Channel separation
50 dB or greater (PHONES
outputs, A-WTD, 20 kHz LPF,
1 kHz nominal input and output,
32Ω termination)
70 dB or greater (Each BUSS
outputs, A-WTD, 20 kHz LPF,
1 kHz nominal input and output,
600Ω termination)
Crosstalk
65 dB or greater (Each BUSS
outputs, A-WTD, 20 kHz LPF,
1 kHz nominal input and output,
600Ω termination)
Power
AC 100–240V, 50-60 Hz
Power consumption
15 W
Dimensions (WHD)
482 x 44 x 280 mm
18.98 x 1.73 x 11.02 in.
Weight
3.8 kg/8.378 lb
4 – Specifications