TEAC SR-L200I-W Owners Manual - Page 10

ENGLISH Listening to the Radio 1 2 3 1 Press the TUNER (FM/AM) button. 3 Select the station you want to listen to (auto selection). 2 To select FM or AM, press the TUNER (FM/AM) button again. Hold down the Skip button of the remote control unit for more than 2 seconds and release it when the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically. < To stop the auto selection, press the Skip button (or slightly turn the TUNING/MULTI JOG rotary knob of the main unit). Selecting stations which cannot be tuned automatically (manual selection) When the TUNING/MULTI JOG rotary knob is turned, or when the Skip button of the remote control unit is pressed momentarily, the frequency changes by a fixed step. Turn the TUNING/MULTI JOG rotary knob (or press the Skip button of the remote control unit) repeatedly until the station you want to listen to is found. FM MODE button Pressing this button alternates between STEREO mode and MONO mode. STEREO FM stereo broadcasts are received in stereo and the "STEREO" indicator lights in the display. If the reception is poor For the best reception, rotate the FM or the AM antenna until you get stations clearly. < If the sound is distorted and the "STEREO" indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. MONO To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise. 18 19