TEAC SR-L200I-W Owners Manual - Page 11

ENGLISH Preset Tuning You can program 20 FM & 10 AM channel presets. 1 Tune in a station you want to listen to (see page 18). How to select preset stations 1 To select FM or AM, press the TUNER (FM/AM) button. 2 Press the MEMORY button. 3 Within 5 seconds, select a preset channel to store the station using the PRESET button. 2 Press the PRESET button repeatedly until the desired preset station is found. 4 Within 5 seconds, press the MEMORY button. To store more stations, repeat steps 1 to 4 . < If the unit is disconnected from the power supply for more than 30 seconds, the settings kept in memory (clock, preset stations, timer setting) will be erased. RDS The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Each time the RDS MODE button is pressed, the RDS mode is changed as follows: PS (Programme Service name) When you select PS, the frequency will be displayed for 3 seconds, and then PS (station's name) will be displayed. If there is no PS data, "NO PS" will be displayed. 1 Tune in an FM RDS station (see page 18). The RDS indicator lights and the Programme Service name (station's name) appears on the display. 2 Press the RDS MODE button. PTY (Programme Type) When you select PTY, the programme type will be displayed. The PTY indicator will light on the display. If there is no PTY data, "NO PTY" will be displayed. RT (Radio Text) When you select RT, the news of stations composed of up to 64 symbols will be displayed. The RT indicator will light on the display. If there is no RT data, "NO RT" will be displayed. 20 21