TEAC TN-100 TN-100 Owner s Manual EFS - Page 7

ENGLISH Playing records 1 Press the STANDBY/ON button on the back of the unit to turn it on. Basic operation 4 Set according to the rotation speed (RPM) of the record. The rotation speed can be set to 33 1/3, 45 or 78 RPM. 7 Move the tone arm to the edge of the record or the track where you want to start playback. When playback finishes When playback finishes, the tone arm automatically returns to the tone arm holder and the rotation stops. To stop playback manually, slightly lift the cue lever or the headshell hook and return the tone arm to its resting position. 2 Open the turntable cover slowly. 5 Move the tone arm clasp to the right to release the tone arm. VV Be careful not to pinch your hand, for example, when opening and closing the turntable cover. 3 Place a record on the turntable. When playing a 45 RPM large-hole single record, use the included adapter. Clasp 6 Lift the cue lever. Cue lever Tone arm ooYou can also leave the cue lever down and move the raised tone arm over the record and then lower the tone arm slowly to start playback. 8 Lower the cue lever. Lower the tone arm slowly until the stylus touches the record and playback begins. ooWe recommend that you close the turntable cover during record playback to avoid dust. VV Do not place anything on the turntable cover. Objects on the cover might cause noise due to vibrations or fall off, especially during playback. CAUTION ooDuring playback, do not touch the tone arm or the rotating record. ooDo not stop turntable rotation during playback. During record playback, feedback could occur if the volume is too loud. If this happens, lower the volume of the amplifier. Cue lever Tone arm Headshell hook ooThe tone arm may not return to the tone arm holder automatically depending on the record. In that case, move the tone arm back to the tone arm holder manually. 7