TP-Link AC1350 Archer C58EU V1 User Guide - Page 60
Specify Wireless Settings, To enable or disable the wireless function
View all TP-Link AC1350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 11 Customize Your Network Settings Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port, so LAN should be selected. Description: Enter a description for this static routing entry. 5. Click OK. 6. Check the System Routing Table below. If you can find the entry you've set, the static routing is set successfully. Done! Open a web browser on your PC. Enter the company server's IP address to visit the company network. 11. 6. Specify Wireless Settings The router's wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. ¾¾ To enable or disable the wireless function: 1. Go to Basic > Wireless. 2. The wireless radio is enabled by default, if you want to disable the wireless function of the router, just clear the Enable Wireless Radio checkbox. In this case, all the wireless settings will be invalid. ¾¾ To change the wireless network name (SSID) and wireless password: 1. Go to Basic > Wireless. 2. Create a new SSID in Network Name (SSID) and customize the password for the network in Password. The value is case-sensitive. Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use. 57