TP-Link AC750 Archer C20i V1 FTP Server Application Guide
TP-Link AC750 Manual
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AC750 manual content summary:
- TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 1
FTP Server Application Guide REV: 1.1.0 1910010819 - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 2
Chapter 1. Topology and USB Device ...1 1.1 Typical Topology ...1 1.2 Special Topology...2 1.3 USB Device ...3 Chapter 2. Configuration of the Wireless Router 4 Chapter 3. Access via Web Browser ...10 3.1 WAN Access ...10 3.2 LAN Access ...15 Chapter 4. Access via PC Client Software ...21 4.1 WAN - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 3
Application Guide Chapter 1. Topology and USB Device Note: Here in this guide, we take the configuration procedures of TL-WDR4300 for example. 1.1 Typical Topology TL-W DR4300 Figure 1-1 Typical Topology Note: 1. USB Flash Device stands for FTP Server in this topology. - 1 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 4
Application Guide 2. Local PC here means the PC that is in the same subnet with the FTP Sever. Local PC can access the FTP Server by LAN (Local Area Network), which is called LAN Access. 3. Remote PC here means the PC that is not in the same subnet with the FTP Sever. Remote PC needs - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 5
Guide The WAN port of TL-WDR4300 is linked to the LAN port of an xDSL modem. If the modem has already obtained a public IP by dialing to the Internet with the username and password provided from your ISP and TL-WDR4300 obtains its IP through Dynamic IP service specific port for FTP server - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 6
Application Guide Chapter 2. Configuration of the Wireless Router To set up your FTP Server, please follow the instructions below: 1. Make sure you have a PC connected to the wireless router, either through wireless connection or wired connection. 2. Plug an external USB hard disk drive or USB flash - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 7
Application Guide Figure 2-2 Login Window 5. Go to USB Settings->FTP Server, the screen will appear as shown in Figure 2-3. The IP behind Internet Address would be used to access the FTP server. - 5 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 8
Folder to add new folders for the FTP Server. The Local PC or Remote PC can only access the folder you add here. 9. Enter a display name for the share folder in Display Name edit box, for example, TP-LINK. 10.Select the Share entire partition or a specific folder option. If you select Share entire - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 9
Application Guide Figure 2-4 Add or Modify Share Folder 11. Click the Save button to save the settings and the screen will appear as shown in the figure below. - 7 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 10
Application Guide Figure 2-5 Click Save 12. Click the Start button to start the FTP Server. Note: 1. The max the FTP Server is restarted. 3. Currently, there is quantitative restriction of FTP Server user. For example TL-WR1043ND supports 2 users at the same time, and TL-WDR4300 supports 4 users - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 11
Application Guide maximum quantity, the following users would fail to log in even if they have input the correct username and password. 4. If a folder contains subfolders, you - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 12
Application Guide Chapter 3. Access via Web Browser Here we take the Web browser Internet Explorer for example. 3.1 WAN Access 1. Input the Internet Address in IE address field. (The address can be found on FTP Server page as shown in Figure 3-2. Here is ftp://218.18.0.163.). Figure 3-1 Input - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 13
a login window will pop up as shown below. Enter the User name and Password of the wireless router (default username: admin, default password: admin, both in lower case letters) and then click Log On. Figure 3-3 Log On 3. Now you can see the IE as Figure 3-4. Double-click the folder TP-LINK. - 11 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 14
Application Guide Figure 3-4 4. You will see the files contained in TP-LINK as below. Figure 3-5 5. To open a folder, right click the folder, for example tplink02, and select Open option. To download a file, right click the file, for example test03.doc, and select Copy option. - 12 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 15
Application Guide Figure 3-6 Figure 3-7 - 13 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 16
Application Guide Note: When trying to open a file by double-clicking the file, an error will occur as shown in Figure 3-8. We recommend that you use Copy and Paste method to download the file on FTP Server. Figure 3-8 - 14 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 17
3.2 LAN Access 1. Go to Start->Run, input cmd as below, then click OK or press Enter key. Application Guide 2. You will see the interface as below. Figure 3-9 Figure 3-10 - 15 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 18
Application Guide 3. Input ipconfig, and press Enter key. Write down the IP address behind Default Gateway as shown in Figure 3-11. (Here is 192.168.0.1). Figure 3-11 4. - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 19
Application Guide A login window will pop up as below. Enter the User name and Password of the wireless router (default username: admin, default password: admin, both in lower case letters) and then click Log On. Figure 3-13 5. Now you can see the IE as below, double-click the folder TP-LINK. - 17 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 20
Figure 3-14 6. You will see the files contained in TP-LINK as below: Figure 3-15 - 18 - Application Guide - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 21
Application Guide 7. To open a folder, right click the folder, for example tplink02, and select Open option. To download a file, right click the file, for example test03.doc, and select Copy option. Figure 3-16 - 19 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 22
Application Guide Figure 3-17 Note: When trying to open the file by double-clicking the file, an error will occur as shown in Figure 3-18. We recommend that you use Copy and Paste method to download the file on FTP Server. Figure 3-18 - 20 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 23
Chapter 4. Access via PC Client Software Here we take CuteFTP Professional 8 for example. 4.1 WAN Access 1. Open the CuteFTP and it will show as below. Application Guide Figure 4-1 - 21 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 24
2. Go to File->New->FTP Site or press Ctrl+N to open a new Site properties. Application Guide Figure 4-2 3. Set the dialog box as below and click Connect. Label: Name of the site. Host address: The Internet Address of FTP Server configuration page (Here is 218.18.0.163). - 22 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 25
Application Guide Figure 4-3 Username: Default setting of the wireless router is admin in lower case letters. Password: Default setting of the wireless router is admin in lower case letters. Comments: The information that you want to record for the specific site. Login method: select Normal Normal - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 26
Application Guide Figure 4-4 4. Now you can see the folder TP-LINK in the panel. Double-click the folder. - 24 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 27
Application Guide Figure 4-5 5. You will see three subfolders and three files in the TP-LINK folder. Figure 4-6 - 25 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 28
6. Double-click a file and it will be downloaded automatically. Application Guide Figure 4-7 Note: When you connect to a site, your My Documents folder is the default local folder to save your downloaded files, and the default remote folder is the folder specified when you configured the site. - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 29
2. You will see the interface as below. Figure 4-8 Application Guide Figure 4-9 - 27 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 30
Application Guide 3. Follow the cursor, input ipconfig and press Enter key. Write down the IP address of Default Gateway as shown in Figure 4-10. (Here is 192.168.0.1). 4. Open the CuteFTP and it will show as below. Figure 4-10 - 28 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 31
Application Guide Figure 4-11 5. Go to File->New->FTP Site or press Ctrl+N to open a new Site properties. - 29 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 32
Application Guide Figure 4-12 6. Set the dialog box as below and click Connect. Label: Name of the site. Host address: The IP of the Default Gateway written down in Step 3 (here is 192.168.0.1). Username: Default setting of the wireless router is admin in lower case letters. Password: Default - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 33
Comments: The information that you want to record for the specific site. Login method: Select Normal. Normal - The user name and password are mandatory to connect to a and password. Double - The user name and password are required twice to connect to a site. Application Guide Figure 4-13 - 31 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 34
7. Now you can see the folder TP-LINK in the panel. Double-click the folder. Application Guide Figure 4-14 8. You can see three subfolders and three files in the TP-LINK folder. - 32 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 35
Application Guide Figure 4-15 9. Double-click a file and it will be downloaded automatically. - 33 - - TP-Link AC750 | Archer C20i V1 FTP Server Application Guide - Page 36
Application Guide Figure 4-16 Note: When you connect to a site, your My Documents folder is the default local folder to save your downloaded files, and the default remote folder is the folder specified when you configured the site. You can specify a different local folder and/or remote folder
FTP Server Application Guide
REV: 1.1.0
1910010819