TP-Link AC900 Archer C20EU V2 User Guide - Page 11
Method 1: Wired, Click the network icon of your computer or go to Wi-Fi Setting of your smart
View all TP-Link AC900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 2 Connect the Hardware 5 ) Verify that the following LEDs are on and stable before continuing with the configuration. Power 2.4G On On 5G Internet On On Tips: If the 2.4GHz and 5GHz LEDs are off, press the Wi-Fi/WPS button until they are on. 2. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wireless 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Setting of your smart device, and the select the SSID to join the network. 8
8
Chapter 2
Connect the Hardware
5 ) Verify that the following LEDs are on and stable before continuing with the
configuration.
Power
On
2.4G
On
5G
On
On
Internet
Tips
:
If the 2.4GHz and 5GHz LEDs are off, press the Wi-Fi/WPS button until they are on.
2. Connect your computer to the router.
•
Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet cable
•
Method 2: Wireless
1 )
Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 )
Click the network icon of your computer or go to Wi-Fi Setting of your smart
device, and the select the SSID to join the network.