TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 User Guide - Page 116
Profile Binding
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Profile ID: Mode: Add IP-range Start IP: End IP: IP-range Table Select: Index: Start IP: End IP: Displays the Profile ID you have created. The attributes of the profile. Permit: Only permit the IP address within the IP range and deny others. Deny: Only deny the IP address within the IP range and permit others. Enter start IP address of the IP-range. Enter end IP address of the IP-range. Select the desired entry for configuration. Displays index of the IP-range which is not configurable. Displays the start IP address of the IP-range. Displays the end IP address of the IP-range. 8.1.7 Profile Binding When the switch receives IGMP report message, it examines the profile ID bound to the access port to determine if the port can join the multicast group. If the multicast IP is not filtered, the switch will add the port to the forward port list of the multicast group. Otherwise, the switch will drop the IGMP report message. In that way, you can control the multicast groups that users can access. Choose the menu Multicast→IGMP Snooping→Profile Binding to load the following page. Figure 8-10 Profile Binding The following entries are displayed on this screen: 106