TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 User Guide - Page 30
System IP
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
The following entries are displayed on this screen: DST Config DST Status: Enable or disable the DST. Predefined Mode: Recurring Mode: Date Mode: Select a predefined DST configuration. USA: Second Sunday in March, 02:00 to First Sunday in November, 02:00. Australia: First Sunday in October, 02:00 to First Sunday in April, 03:00. Europe: Last Sunday in March, 01:00 to Last Sunday in October, 01:00. New Zealand: Last Sunday in September, 02:00 to First Sunday in April, 03:00. Specify the DST configuration in recurring mode. This configuration is recurring in use. Offset: Specify the time adding in minutes when Daylight Saving Time comes. Start/End Time: Select starting time and ending time of Daylight Saving Time. Specify the DST configuration in Date mode. This configuration is recurring in use. Offset: Specify the time adding in minutes when Daylight Saving Time comes. Start/End Time: Select starting time and ending time of Daylight Saving Time. Note: 1. When the DST is disabled, the predefined mode, recurring mode and date mode cannot be configured. 2. When the DST is enabled, the default daylight saving time is of European in predefined mode. 4.1.5 System IP Each device in the network possesses a unique IP Address. You can log on to the Web management page to operate the switch using this IP Address. The switch supports three modes to obtain an IP address: Static IP, DHCP and BOOTP. The IP address obtained using a new mode will replace the original IP address. On this page you can configure the system IP of the switch. 20