TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 User Guide - Page 130
Storm Control
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
The following entries are displayed on this screen: Rate Limit Config UNIT:1/LAGS: Select: Port: Ingress Rate (1-1000000Kbps): Egress Rate(1-1000000Kbps): LAG: Click 1 to configure the physical ports. Click LAGS to configure the link aggregation groups. Select the desired port for Rate configuration. It is multi-optional. Displays the port number of the switch. Configure the bandwidth for receiving packets on the port. You can select a rate from the dropdown list or select "Manual" to set Ingress rate, the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Ingress rate. Configure the bandwidth for sending packets on the port. You can select a rate from the dropdown list or select "Manual" to set Egress rate, the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Egress rate. Displays the LAG number which the port belongs to. Note: 1. If you enable ingress rate limit feature for the storm control-enabled port, storm control feature will be disabled for this port. 2. When egress rate limit feature is enabled for one or more ports, you are suggested to disable the flow control on each port to ensure the switch works normally. 9.2.2 Storm Control Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network. If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. Choose the menu QoS→Bandwidth Control→Storm Control to load the following page. Figure 9-11 Storm Control 120