TP-Link TD-W9960 TD-W9960EU V1 User Guide - Page 65
Use WPS for Wireless Connection, Method 1: Use the WPS button
View all TP-Link TD-W9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 13 Specify Your Network Settings Transmit Power: Select Low, Middle, or High to specify the data transmit power. The default and recommended setting is High. ¾¾ To change the security option: 1. Go to Advanced > Wireless > Wireless Settings page. 2. Select an option from the Security drop-down list. The router provides four options, None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2 uses the newest standard and the security level is the highest. We recommend you don't change the default settings unless necessary. 13. 3. 2. Use WPS for Wireless Connection You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing network quickly and easily. Method 1: Use the WPS button Use this method if your client device has a WPS button. 1. Press the WPS button the modem router for 1 second. 2. Press the WPS button of the client device directly. 3. The WPS LED flashes for about 2 minutes during the WPS process. 4. When the WPS LED is on, the client device has successfully connected to the modem router. Method 2: Use the WPS button on the web management page Use this method if your client device has a WPS button. 1. Visit http://tplinkmodem.net, and log in with the account you set for the router. 2. Go to Advanced > Wireless > WPS page. 3. Click Start WPS on the page. 4. Press the WPS button of the client device directly. 5. The LED of the router flashes quickly. 61