TRENDnet AC1200 User's Guide - Page 14

TRENDnet User's Guide Administrator System Management You can configure the administrator password. The device URL (host name) can be entered in place of the IP address you choose and the default is http://192.168.10.110 or http://tew-800mb/ , to access this device. TEW-800MB Settings Management You can save system settings by exporting them, as a backup, to a configuration file; restore them by importing the file, or reset them to factory default. Upload Firmware Navigate to the folder on your computer where the unzipped firmware file (.bin) is located and select it for firmware upgrade. Click Apply. If prompted, click Yes or OK to start the firmware upgrading process. Export Settings This option allows you to export and then save the media bridge's configuration to a file on your computer as a backup. Be sure to save the configuration before performing a firmware upgrade. Import Settings Use this option to restore previously saved media bridge configuration settings. Load Factory Defaults This option restores all configuration settings back to the settings that were in effect at the time the media bridge was shipped from the factory. Any settings that have not been saved will be lost. If you want to save your media bridge configuration settings, use the Export Settings option above. System Reboot This restarts the media bridge. It is useful for restarting when you are not near the device. © Copyright 2013 TRENDnet. All Rights Reserved. 14