TRENDnet AC1200 User's Guide - Page 19
Media Bridge Maintenance & Monitoring, Reset your Media Bridge to factory defaults - extender
View all TRENDnet AC1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TRENDnet User's Guide 3. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapter or the media bridge's site survey tool to determine the best antenna orientation for your wireless devices. 4. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors. If possible, upgrade wireless network interfaces (such as wireless cards in computers) from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device uses an older standard, the performance of the entire wireless network may be slower. If you are still experiencing low or no signal consider repositioning the wireless devices, installing additional access points or wireless extenders. TEW-800MB Media Bridge Maintenance & Monitoring Reset your Media Bridge to factory defaults Administrator > Settings Management You may want to reset your media bridge to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting. Before you reset your media bridge to defaults, if possible, you should backup your media bridge configuration first; restore configuration after firm upgrade or reset, see "Backup and restore your media bridge configuration settings" on page 20. There are two methods that can be used to reset your media bridge to factory defaults. • Reset Button - Located on the bottom panel of your media bridge, see "Product Hardware Features" on page 4. Use this method if you are encountering difficulties with accessing your router management page. OR • Settings Management Page 1. Log into your media bridge management page (see "Installation and Login" on page 6). 2. Click on Administrator and click on Settings Management. © Copyright 2013 TRENDnet. All Rights Reserved. 3. Under Load Factory Default, click Load Default. When prompted to confirm this action, click OK. 4. To restore your media bridge configuration: refer to the next page. 19