Thermador UCVM30FS User Manual - Page 7

CARE AND CLEANING ❑ Always use the mildest cleaner that will do the job. Use clean, soft cloths, sponges or paper towels. ❑ Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water marks. ❑ After cleaning, place all parts in their proper positions before using. The cleaners recommended below indicate a type and do not constitute an endorsement. Use all products according to package directions. Care and Cleaning Chart A Anodized Top cap is not removable. Wash top and underside with hot sudsy water. Aluminum Rinse and wipe dry or apply Fantastic® or Formula 409® first to a clean Top Caps for sponge or paper towel and wipe clean. Stainless DO NOT USE powdered cleansers or steel wool pads. B Aluminum Clean filters in the dishwasher or by agitating in sudsy water. Ensure that Mesh Filters there is no soil trapped in the fine mesh. Dry the filters before reinstalling them. C Plastic Controls DO NOT REMOVE push-button or control knob. Wipe with a moist soapy sponge. Rinse and dry. D Painted Wash top and underside with hot sudsy water. Rinse and wipe dry or Top Cap for apply Fantastic® or Formula 409® first to a clean sponge or paper towel Black/White and wipe clean. DO NOT USE powdered cleansers or steel wool pads. E Stainless Steel Parts Wipe grease accumulation with a paper towel or sponge. Scrape heavy buildup with a plastic spatula. Clean with a soapy sponge; rinse and dry. Always wipe or rub with grain. Wipe with Fantastic® or Formula 409® sprayed onto a paper towel. If grease buildup is heavy, several appliacations may be necessary. Polish with Stainless Steel Magic® and a soft cloth. Remove water spots with a cloth dampened with white vinegar. Use Cameo Aluminum and Stainless Steel Cleaner® to remove heat discoloration. 7