TomTom RIDER 2nd Edition User Guide - Page 15
Placing your TomTom RIDER in the Holder, the Holder first. - motorcycle mount
UPC - 636926016841
View all TomTom RIDER 2nd Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Attach this mount only to a part of your motorcycle that is strong enough to hold the mount, the Holder and your RIDER. Note: It is very difficult to remove the Adhesive Mount. Think carefully about where you want to attach the Adhesive Mount. Clean the position you have chosen thoroughly and make sure that you remove any grease or dirt. To use this mount, follow these steps: 1. Attach the adhesive pad to the Adhesive Mount. 2. Press and hold the Adhesive Mount in the position you have chosen. 3. Screw the Holder to the Adhesive Mount using four of the small screws included with the mounting kit. You can now place your TomTom RIDER in the Holder. See this section:Placing your TomTom RIDER in the Holder on page 15 Placing your TomTom RIDER in the Holder 1. Open the Holder and place the bottom edge of your TomTom RIDER into the Holder first. Make sure that the two teeth on the bottom of the Holder meet the two connections on your RIDER. If your RIDER is not placed in the Holder correctly, it may fall out while you are driving. 2. Push your RIDER firmly into place. 15