Toshiba 20A23 Owners Manual - Page 9

To Memorize Channels, Adjusting The Picture

Page 9 highlights

TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting. TV/CABLE SELECTION 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "TV/CABLE" begins to flash. 4 Press ENTER to select the TV or CABLE mode. The arrow indicates the selected mode. MENU CH SETUP PICTURE LANGUAGE V-CHIP SET LOCK ON TIMER 〈+ / Ð / ENTER / MENU〉 TV CABLE AUTO CH MEMORY ADD / DELETE 〈 + / - / ENTER / MENU 〉 5 Press MENU repeatedly until the MENU screen is cleared. NOTE: Contact your cable company to determine the type of cable system used in your area. AUTOMATIC CHANNEL MEMORY 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "AUTO CH MEMORY" begins to flash, then press ENTER. The TV will begin memorizing all the channels available in your area. Channel numbers will remain red until auto memorizing is complete. MENU CH SETUP PICTURE LANGUAGE V-CHIP SET LOCK ON TIMER 〈+ / Ð / ENTER / MENU〉 TV CABLE AUTO CH MEMORY ADD / DELETE 〈 + / - / ENTER / MENU 〉 4 Press MENU repeatedly until the MENU screen is cleared. TO ADD/DELETE CHANNELS 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "ADD/DELETE" begins to flash, then press ENTER. 4 Select the desired channels to be added or deleted using the Direct Channel Selection buttons (0-9), CH + or - or SET + or -. MENU CH SETUP PICTURE LANGUAGE V-CHIP SET LOCK ON TIMER 〈+ / Ð / ENTER / MENU〉 TV CABLE AUTO CH MEMORY ADD / DELETE ENTER / MENU 〉 5 Press ENTER to select ADD or DELETE. If an unmemorized channel was selected (step 4), the channel indication will be red. Press ENTER if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the chan- nel indication will be green. To delete the channel from memory, press ENTER repeatedly until "DEL" appears on-screen. The channel ADD CH 012 indicator will change from green to red when a channel is deleted. Repeat Steps 4 and 5 for each channel to be 〈0 - 9 / + / - / ENTER / MENU〉 added or deleted. 6 Press MENU repeatedly until the MENU screen is cleared. ADJUSTING THE PICTURE You can adjust the settings for color, sharpness, contrast, brightness and tint. 1 Press MENU. 4 Press SET + or - to adjust the setting. 2 Press SET + or - until the indicator next to "PICTURE" begins to flash, then press ENTER. 3 Press ENTER repeatedly to select the item you want to adjust. BRIGHTNESS CONTRAST COLOR TINT SHARPNESS BRIGHTNESS CONTRAST COLOR TINT SHARPNESS + higher lighter deeper greenish sharper - lower darker paler reddish softer TO RETURN TO INITIAL SETTING: Press RESET while the picture adjusting mode appears on-screen. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

9
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
Press
MENU
.
Press
SET +
or
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
Press
SET +
or
until the indicator next
to “TV/CABLE” begins to flash.
Press
ENTER
to select the TV or CABLE
mode. The arrow indicates the selected
mode.
Press
MENU
repeatedly until the
MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
Press
MENU
repeatedly until the MENU screen is
cleared.
TO ADD/DELETE CHANNELS
Press
MENU
.
Press
SET +
or
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
Press
SET +
or
until the indicator
next to “ADD/DELETE” begins to flash,
then press
ENTER
.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0-9),
CH +
or
or
SET
+
or
.
1
2
3
4
5
4
1
2
3
4
5
Press
ENTER
to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press
ENTER
if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. To delete the channel from
Press
MENU
repeatedly until the MENU screen is
cleared.
6
memory, press
ENTER
repeatedly until
“DEL” appears on-screen. The channel
indicator will change from green to red
when a channel is deleted. Repeat
Steps 4 and 5 for each channel to be
added or deleted.
ADD
CH 012
0 – 9 / + / – / ENTER / MENU
AUTOMATIC CHANNEL MEMORY
Press
MENU
.
Press
SET +
or
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
1
2
Press
SET +
or
until the indicator next
to “AUTO CH MEMORY” begins to flash,
then press
ENTER
. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
3
ADJUSTING THE PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
AUTO
CH
MEMORY
TV
ADD / DELETE
CABLE
+ / — / ENTER / MENU
AUTO
CH
MEMORY
TV
ADD / DELETE
CABLE
+ / — / ENTER / MENU
AUTO
CH
MEMORY
TV
ADD / DELETE
CABLE
+ / — / ENTER / MENU
1
2
4
Press
SET +
or
to adjust the setting.
CONTRAST
COLOR
BRIGHTNESS
TINT
SHARPNESS
3
Press
MENU
.
Press
SET +
or
until the indicator next to “PICTURE”
begins to flash, then press
ENTER
.
Press
ENTER
repeatedly to select the item you want to
adjust.
TO RETURN TO INITIAL SETTING:
Press
RESET
while the picture adjusting mode appears
on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
higher
lighter
deeper
greenish
lower
darker
paler
reddish
softer
sharper