Toshiba 32AF62 Owners Manual - Page 18

Setting up your TV C.CAPT EXIT Adding and erasing channels manually After you have automatically programmed the channels into the TV's memory, you can manually add and erase individual channels. To add a channel to or erase a channel from the TV's memory: 1. Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel. 2. Press MENU. 3. Press x or • to highlight the SET UP menu. 4. Press y or z to highlight ADD/ERASE. SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL ANT1/2: [ANT1] ANT2 TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE MORE MOVE [ ] SELECT [ ] 5. Press x or • to select ADD or ERASE, whichever function you want to perform. 6. Press MENU. 7. Repeat steps 1-6 for other channels you want to add or erase, or press EXIT to return to normal TV viewing. LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER 12 45 3 CH 6 78 9 VOL CH RTN 100 0 ENT ADV/ PIP CH CH (Channel) Channel Numbers MENU FAV ENTER FAV MENU RESET ADV/ PIP CH EXIT Changing channels To change to the next programmed channel: Press CHANNEL y z. To change to a specific channel (programmed or unprogrammed): Press the CHANNEL NUMBERS (0-9 and 100). Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100, 0, 0; to select channel 125, press 100, 2, 5). Image tilt correction When you install or change the direction of the TV, the picture may become tilted (caused by the Earth's magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture. To adjust the image tilt: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight IMAGE TILT. 3. Press x or • to adjust the picture tilt (from -10 to +10). SET UP MORE DEMO [START] STOP IMAGE TILT +3 - + MOVE [ ] SELECT [ ] 18