Toshiba 42HP82 Owners Manual - Page 11

Using the wired remote control mode Connect the supplied remote cable to the remote controller's remote jack and the "REMOTE CONTROL" terminal on the display. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote controller can be operated even if no batteries are loaded. Operating Range • Use the remote controller within a distance of about 23ft / 7 m. from the front of the display's remote control sensor and at horizontal and vertical angles of up to approximately 30°. • The remote control operation may not function if the display's remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote controller. RGB 3 (Digital RGB) AUDIO 3 RGB2 / DVD2 / HD2 AUDIO 2 DVD1/HD1 AUDIO 1 VIDEO 1 VIDEO 2 L ( MONO ) R Y CB / PB CR / PR L ( MONO ) R RGB 1 R / CR / PR G/Y / VIDEO 3 B / CB / PB HD VD L ( MONO ) R CONTROL LOCK ON / OFF REMOTE CONTROL EXTERNAL CONTROL R CONTROL LOCK ON / OFF REMOTE CONTROL EXTERNAL CONTROL Remote Control Cable To Remote Jack PROCEED DOWN VOLUME UP LEFT/ - RIGHT/+ INPUT SELECT / EXIT Approx. 23ft / 7m POWER / STANDBY Handling the remote controller • Do not drop or mishandle the remote controller. • Do not get the remote controller wet. If the remote controller gets wet, wipe it dry immediately. • Avoid heat and humidity. • When not using the remote controller for a long period, remove the batteries. • Do not use new and old batteries together or use different types together. • Do not take apart the batteries, heat them, or throw them into a fire. • When using the remote controller in the wireless condition, be sure to unplug the remote cable from the REMOTE CONTROL terminal on the display. 11