Toshiba 42HP82 Owners Manual - Page 38

Options Settings Menu Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting "AUDIO 1" to "VIDEO 2" Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then... Information Ⅵ AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. Ⅵ Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. 1. Use the v and w buttons to select "OPTIONS," then press the PROCEED button. The "OPTIONS" screen appears. 2. Use the v and w buttons to select "AUDIO1." OPTIONS AUDIO INPUT AUDIO1 : VIDEO1 AUDIO2 : HD/DVD1 AUDIO3 : RGB1 BNC SELECT : RGB RGB SELECT : AUTO HD SELECT : 1080B SEL. ADJ. EXIT RETURN 3. To set the AUDIO1 to "VIDEO2"... Use the ᮤ and ᮣ buttons to select "VIDEO2." The mode switches as follows each time the ᮤ or ᮣ button is pressed. The available sources depend on the setting of "BNC SELECT". RGB: COMP.: → VIDEO1 ↔ VIDEO2 ↔ HD/DVD/DTV← →RGB/PC3 ↔RGB/PC2 ↔RGB/PC1 ← → VIDEO1 ↔ VIDEO2 ↔ HD1/DVD1/DTV1← →RGB/PC3 ↔RGB/PC1 ↔HD2/DVD2/DTV2 ← VIDEO: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3← →RGB/PC3 ↔RGB/PC1 ↔HD/DVD/DTV ← OPTIONS AUDIO INPUT AUDIO1 : VIDEO2 AUDIO2 : HD/DVD1 AUDIO3 : RGB1 BNC SELECT : RGB RGB SELECT : AUTO HD SELECT : 1080B SEL. ADJ. EXIT RETURN 4. Once the setting is completed... Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more. 38