Toshiba 42HP82 Owners Manual - Page 28

Screen Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "SCREEN," then press the PROCEED button. The "SCREEN" menu appears. Default settings (when RGB/PC is selected) SCREEN MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN • The settings on the SCREEN menu are not preset at the factory. To select a mode ... Use the ᮤ and ᮣ buttons to select a mode. The mode switches as follows when the ᮤ and ᮣ buttons are pressed: → NORMAL ↔ FULL ← • The mode can also be switched by pressing the "WIDE" button on the remote controller. 2. To adjust the vertical position ... Use the v and w buttons to select "V-POSITION". SCREEN MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN 3. Adjust using the ᮤ and ᮣ buttons. V-POSITION • If neither the ᮤ or ᮣ button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To continue making other computer image adjustments ... Repeat from step 2. 4. Once all adjustments are completed ... Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more. Information Ⅵ When "AUTO PICTURE" is "OFF" MODE SCREEN : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN When Auto Picture is off, the Fine Picture and the Picture ADJ items are displayed so that you can adjust them. 28