Toshiba 50L2200U User Guide - Page 82
Selec, he op, ical audio ou, Using, he Dolby, al Dynamic Range Con, ol fea
View all Toshiba 50L2200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
82 Using the TV's features Adjusting the audio When you use ColorStream® HD or Video, switch the AV input mode as appropriate. Selecting the optical audio output format You can select the optical audio output format when you connect a Dolby® Digital decoder or other digital audio systems to the TV's Optical Audio Out terminal (see "Connecting a digital audio system" on page 30). To select the optical audio output format: 1 Press the MENU button, and then open the Sound menu. 2 Highlight Audio Setup, and then press the ENTER button. 3 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device. 4 To save the new settings, highlight Done, and then press the ENTER button. To reset the settings to the factory defaults, highlight Reset, and then press the ENTER button. Using the Dolby® Digital Dynamic Range Control feature You can further compress Dolby Digital dynamic range, allowing you to switch from digital to analog broadcasts at the same dynamic range. To use the Dolby Digital Dynamic Range Control: 1 Press the MENU button, and then open the Sound menu. 2 Highlight Audio Setup, and then press the ENTER button. 3 In the Dolby Digital Dynamic Range Control field, select either Compressed or Standard. When Standard is selected, the audio outputs with minimal compression. 4 To save the new settings, highlight Done, and then press the ENTER button. To reset the settings to the factory defaults, highlight Reset, and then press the ENTER button. NOTE ❖ This feature is available when the TV is tuned to a digital RF channel with the Dolby Digital signal. ❖ The Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode).