Toshiba BDX1250KU Owners Manual - Page 15
Upgrade], USB Storage, Network, SW upgrade by Network introduction - firmware
View all Toshiba BDX1250KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6. Press OK, enter Resolution setting. Choose a resolution that fits your TV. Change will be applied immediately, you have 15s to determine whether to save the setting or rollback to prior resolution. Better performance will be provided by an HDMI connection! Auto 480i/576i 480p/576p 720p 1080i 1080p Previous OK Next Press / to select an option. Press OK. Select "Yes" or "No" using /. Resolution 14s has been changed! Does everything looks all right with this resolution? Press Yes if you want to apply it. Press No to rollback to previous one. Yes No Previous OK Next 7. Press OK, enter Aspect ratio setting. Choose an aspect ratio that fits your TV. The change will be applied in the next page. Determine whether to save the setting or rollback to the previous aspect ratio. 16:9 Full 16:9 Normal 4:3 Pan&Scan 4:3 Letterbox Previous OK Next Press / to select an option. Press OK. Setting wizard is complete! Now press the OK button to finish and return to the Setup Menu. Previous OK Finish 8. Press OK to return to [General Setting] Menu. • [Upgrade] For software upgrades to enhance performance, you could select the following upgrade method and start to upgrade. {Disc}/{USB Storage}/{Network} SW upgrade by Disc/USB Storage Upgrade the software from the disc or USB Flash device. 1. Insert the disc or connect the USB Flash device which contains the upgrade file package. 2. Follow the instruction on the TV screen to confirm upgrade operation. - The system will reboot after 5 seconds or OK key is pressed. Notes: - If set [Disc Auto Playback] to [Off], after you insert the disc that contains the upgraded information to upgrade system, you have to start upgrade from this option of SETUP Menu. - If the upgrade file package did not pass the verification, error prompt is displayed, check the package again (such as the package is not complete). - Make sure the firmware version is not an old version. - When you upgrade the system using USB Flash device, you should make a new folder named UPG_ALL, and copy the upgrade file into this folder. SW upgrade by Network introduction There are two modes to upgrade via internet: Automatic Mode and Interactive Mode. Automatic Mode: The player will check the internet whether it is connected automatically when powered on. If connected, player will try to connect the Toshiba server to check if there is new firmware for the player. If yes, the player will pop up a message on the screen to inform you that an upgrading firmware is available on the internet. You can choose whether to upgrade or not. Upgrade New software found! Upgrade? Cancel OK Start Interactive Mode: You can also do network upgrade via setup menu. You should make sure that the player is connected to the internet first. Press "SETUP" button of the remote control, then choose "System -> Upgrade -> Network" and press "OK" button. Then the player will connect the Toshiba server to check if there is new firmware for the player. Upgrade Connecting to the server. Please wait! If yes, the player will pop up a message on the screen and you can choose whether to upgrade or not. Upgrade New software found! Upgrade? Cancel OK Start 15 English