Toshiba BDX1250KU Owners Manual - Page 20
Audio Output], Spdif], Bitstream, Re-encode, HDMI], Down_samp], Dolby DRC], General Setting, System
View all Toshiba BDX1250KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English [Audio Output] • [Spdif] Select the output mode of COAXIAL jack, options include Bitstream, PCM, Re-encode and Off. {Bitstream} - Output digital signal without any processing. {PCM} - Output digital signal with processing, only two channels export. {Re-encode} - Auto select signal type from COAXIAL jack according to the Audio stream on disc. {Off} - No output for S/PDIF. • [HDMI] Select the output mode of HDMI Out jack, options include Bitstream, PCM, Re-encode and Off. {Bitstream} - Output HDMI digital signal without any processing. {PCM} - Output HDMI digital signal with processing, only two channels export. {Re-encode} - Auto select signal type from HDMI Out jack according to the Audio stream on disc. {Off} - No output for HDMI. • [Down_samp] Select the digital audio signal sampling frequency. {48K} - For discs recorded at sampling rate of 48 kHz. {96K} - For discs recorded at sampling rate of 96 kHz. {192K} - For discs recorded at sampling rate of 192 kHz. • [Dolby DRC] Select the Dynamic Range Control mode which makes it available to listen to a movie at a low volume without losing sound clarity. {Off} - Non-dynamic range compress. {On} - Dynamic range compress. {Auto} - Adjust the DRC according to input audio. The setting of Auto is effective for Dolby TrueHD. System Information 1. Press SETUP, [General Setting] menu is displayed. 2. Press to select [System Information]. - The current software version and MAC address will be displayed. - Press to return to the previous menu. - Press SETUP to exit the menu. System Information Software version: V XX MAC: E8-9D-87-XX-XX-XX Move cursor key to select menu option then use "OK " key to select SETUP Exit 20