Toshiba BDX1250KU Owners Manual - Page 19
HDMI Deep Color]
View all Toshiba BDX1250KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English manual for details. • [Color Space] Select a predefined Color space of picture. {RGB} - Select RGB Color space. {YCbCr} - Select YCbCr Color space. {YCbCr422} - Select YCbCr422 Color space. {Full RGB} - Select Full RGB Color space. • [HDMI Deep Color] This feature is available only when the display device is connected by a HDMI cable, and when it supports Deep Color feature. {30 bits} - Output 30 bits Color. {36 bits} - Output 36 bits Color. {Off} - Output standard 24 bits Color. Note: -When the color space is "YCbCr422", even if HDMI Deep Color is set to 30bits/36bits, it is not output with Deep Color. • [HDMI 1080/24p] {On} - Enable 1080/24p video resolution setting. {Off} - Disable 1080/24p video resolution setting. Notes about HDMI 1080/24p: If you want the 24Hz output, it should fulfill below 3 conditions: 1.TV supports the 24Hz display; 2.Player choose the 24Hz option in the setup menu; 3.Media must be the 24Hz video. Notes: - This resolution becomes effective only when the playing Blu-ray Disc™ contents are Film source. - During HDMI 1080/24p playback, there will be no composite output. [Video Process] Display Setting TV Video Process Video Adjust Sharpness More... Low Move cursor key to select menu option then use "OK " key to select SETUP Exit • [Video Adjust] Select a predefined setting of the video. 1. Press OK . 2. Press/ to adjust the video Brightness, Contrast, Hue and Saturation. {Brightness} - Press t/ to adjust the brightness of display, goes left means dark and right means bright. {Contrast} - Press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast. {Hue} - Press t/ to adjust the Hue of display, goes left means low hue and right means high hue. {Saturation} - Press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation. 3. Press RETURN to exit. Brightness Contrast Hue Saturation Change RETURN Exit • [Sharpness] Select the level of sharpness: High, Middle, Low. {High} - Select High sharpness level. {Middle} - Select Middle sharpness level. {Low} - Select Low sharpness level. Audio Setting 1. Press SETUP, [General Setting] menu is displayed. 2. Press to select [Audio Setting], then press . 3. Select an option, press to access. Audio Setting Audio Output Spdif PCM HDMI PCM Down_samp 48K Dolby DRC Auto Move cursor key to select menu option then use "OK " key to select SETUP Exit 4. Press / to select a setup option and press . 5. Select the setting you wish to change and press OK to confirm. - Press to return to the previous menu. - Press SETUP to exit the menu. 19