Toshiba SD-2700U Owners Manual - Page 19
Connecting to an amplifier equipped with an MPEG2 audio decoder, Connections
View all Toshiba SD-2700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connections Warning • When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from the onscreen displays 38 40 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD video player. Connecting to an amplifier equipped with an MPEG2 audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. Amplifier equipped with an MPEG2 audio decoder VIDEO OUT VIDEO Y PB PR AUDIO OUT To OPTICAL type digital audio input To COAXIAL type digital audio input S R L COAXIAL OPTICAL ANALOG BITSTREAM/PCM Connect either. 75 Ω coaxial cable Optical digital cable • Use DVD video discs encoded via the MPEG2 recording system. • Make the following setting. On-screen display Select: Page "Audio Out Select" "Bitstream" 38 40 Recording system MPEG 35 Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). Amplifier equipped with a digital audio input To OPTICAL type digital audio input To COAXIAL type digital audio input VIDEO OUT VIDEO Y PB PR AUDIO OUT S R L COAXIAL OPTICAL ANALOG BITSTREAM/PCM Connect either. 75 Ω coaxial cable Optical digital cable • Make the following setting. On-screen display Select: Page "Audio Out Select" "PCM" 38 40 Notes • DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the DVD video player. • Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "OPTICAL" or "COAXIAL" input of a Receiver or Processor. • Refer to the owner's manual of the connected equipment as well. • When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the speakers may be damaged. 19