Toshiba SD-P1500 Owners Manual - Page 59

r Warning • When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have the Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from the on-screen displays [44)[_7). Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the AV OUT jack of the player is connected to an amplification system. To enjoy DTS Digital Surround _Mplayback, an external 5.1 channel DTS Digital Surround 'M decoder system must be connected to the BITSTREAM/PCM jack of the player. MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. A_ P_I_ raeqiLi°PdPeec_d°a_net To digital audio input _, ^ (optical/coaxial) Digitat cable (supplied) 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). _dAigmiPt_ifierdeq_inPPtd with a ] _ Digital cable (supplied) • Use DVD video discs encoded via the MPEG2 recording system. • Make the following setting. On-screen display Select: Page "Audio Out Select" "Bitstream" [44_ Recording system MPEG [_ O 0 Make the following setting. On-screen display Select: "Audio Out Select.... PCM" Notes • DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player. • Connect the BITSTREAM/PCM jack of the player to the "COAXIAL' input of a Receiver or Processor. • Refer to the owner's manual of the connected equipment as well. • When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the player's power cord. If you leave the amplifier power on, the speakers may be damaged. soI