Toshiba SD-P2700 User Manual - Page 58

Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 19921997 Dolby Laboratories, Inc. All rights reserved. Amplifier equipped with a Dolby Digital decoder • Use DVD video discs encoded via the Dolby Digital recording system. • Make the following setting. To digital audio input (optical/coaxial) To BITSTREAM/PCM Coaxial cable or optical digital cable (not supplied) On-screen display Select: Page 46 "Audio Out Select" "Bitstream" 49 Recording system Dolby Digital 41 Connecting to an amplifier equipped with Dolby Surround Pro Logic® Dolby Surround Pro Logic® • Make the following setting. You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic® by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two On-screen display Select: Page rear speakers). With an amplifier equipped with Dolby Digital 46 "Audio Out Select" "Analog 2ch" 49 Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Surround Pro Logic using this connection. With an amplifier not equipped with Dolby Digital Connect the equipment as follows. * Amplifier equipped with Dolby Surround Pro Logic * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. To analog audio input To AV OUT (yellow) Audio/video cable (supplied) 58