Tripp Lite SMX500RT1U Owner's Manual for SmartPro Rack 932259 - Page 3
Mounting Rack
View all Tripp Lite SMX500RT1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
201109267 93-2259-EN.qxd 10/21/2011 3:39 PM Page 3 Mounting (Rack) Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications. 4-Post Mounting All UPS models include hardware required to mount in a 4-post rack. Select models include an adjustable rackmount shelf kit to provide additional support. If your UPS model does not include an adjustable rackmount shelf kit, skip steps 1 and 2. 1 Connect the two segments of each shelf A using the B included screws and nuts B . Leave the screws slightly loose so that the shelves can be adjusted in the next step. 2 Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack with the screws, nuts and washers provided B . Note that the support ledges should face inward. Tighten the screws that connect the shelf segments A . A 1 B A 2 3 Attach mounting ears C to the front mounting holes of your UPS D using the screws provided E . The D ears should face forward. C E 3 4 Using an assistant if necessary, lift your UPS and slide it onto the mounting shelves (if your model includes F the shelves). Attach your UPS to the rack by using the appropriate hardware F through its mounting ears and into the rack rails. 4 3