Tripp Lite SUINT2000XL Owner's Manual for SUINT1000XL/SUINT2000XL/SUINT3000XL - Page 4
Optional Installation - manual
View all Tripp Lite SUINT2000XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
200607207 93-2525 230V Smartonline OM.qxd 11/9/2006 3:51 PM Page 4 Optional Installation The connections are optional. Your UPS will function properly without these connections. 1 Serial Port Connection Using the serial cable provided, connect the serial port on your computer to the serial port of your UPS. Install on your computer the PowerAlert UPS monitoring software program (included on CD-ROM) appropriate for your operating system. See Communications in the Basic Operation section of this manual to determine how to monitor and manage your UPS using this port. 2 External Battery Pack Connection Check to ensure that the external batteries you are connecting match the voltage listed on your UPS's battery connector. Plug either end of the battery connection cable (supplied with the battery pack) into the UPS's External Battery Connector and the other end into the Battery Output Connector on the rear panel of the external battery pack. Since your UPS has internal batteries, external batteries are only needed to extend runtime. Adding external batteries will increase recharge time as well as runtime. Make sure that each end of the cable is fully inserted into its connector. Several small sparks may result during battery connection; this is normal. 1 SUINT2000XL shown SUINT2000XL shown SU1000T shown 2 4