Troy-Bilt CS 4325 Operation Manual - Page 11
Maintenance & Adjustments - chipper
View all Troy-Bilt CS 4325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Maintenance & Adjustments 6 Maintenance General Recommendations • Always observe safety rules when performing any maintenance. • The warranty on this chipper shredder does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the equipment as instructed here. • Changing of engine-governed speed will void engine warranty. • All adjustments should be checked at least once each season. • Periodically check all fasteners and make sure these are tight. WARNING: Always stop engine, disconnect spark plug, and ground against engine before, cleaning, lubricating, or performing any type of maintenance on your machine. Lubrication 1. Lubricate the chipper chute hinge a with light oil once a season. 2. Lubricate the pivot points on the chute deflector with light oil once a season. 3. Follow the separate engine manual packed with your unit for engine lubrication instructions. Equipment Care • Clean the chipper shredder thoroughly after each use. • Wash bag periodically with water. Allow to dry thoroughly in shade. • If the reduction chamber becomes clogged, remove and clean as instructed below. NOTE: Cleaning with a forceful spray of water is not recommended as it could contaminate the fuel system. Engine Care Refer to the Maintenance section of the Engine Operator's manual packed with your unit. Read and follow instructions carefully. • Check engine oil level before each use as instructed in the separate engine manual. • Clean or replace air cleaner every 25 hours under normal conditions. Clean every few hours under extremely dusty conditions. To service the air cleaner, refer to the engine manual. • The spark plug should be cleaned and the gap reset once a season. Check engine manual for correct plug type and gap specifications. • Clean engine regularly with a cloth or brush. Keep the top of the engine clean to permit proper air circulation. Remove all grass, dirt, and combustible debris from muffler area. 11