Uniden 24-148 English Owners Manual - Page 12

Installing the Handset Battery Pack Charge the battery pack for 15-20 hours before plugging the phone line into your phone. 1 Press in on the battery cover release and slide the cover down until it comes off. 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment. 3 Slide the battery cover forward until it snaps into place. 4 Place the handset on the base as shown. 5 Make sure that the status LED lights. If the LED doesn´t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. Use only the Uniden Battery (BT-800) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department (See page 7). [ 10 ] G E T T I N G S T A R T E D