Uniden 24-148 English Owners Manual - Page 49

Remote access away from home You can operate your answering system from a remote location using any touchtone telephone. Use this function to check for recorded messages, to play or delete messages, to record a new outgoing message, and to monitor sounds in the room. 1 Call your telephone number. 2 While the greeting message is played, press # and your PIN code within 2 seconds. If the answering system is of f, let it ring 10 times. The tone sounds. Then, press # and your PIN code within 2 seconds. 3 The answering system announces the time and day and the number of messages stored in memory. Then the message playback automatically begins. 4 You may continue to listen to your message, or you may select a command from the following chart. • During the remote operation, displays on the base. • You must enter a command within 15 seconds of entering command waiting mode. Otherwise the answering system automatically hangs up and returns to standby. Command # then 1 Repeat a message Function • The system will only playback messages for # then 2 Playing your messages four minutes and then it # then 3 # then 4 # then 5 # then 6 # then 7 Skipping a message Deleting a message Stop message playback Answering system on Voice memo record/stop (up to 4 minutes recording time) returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds. # then 8 Greeting message record/stop # then 9 Answer system off # then * Room monitor 5 Af ter all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above. T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 47 ] THE INTEGRATED ANSWERING DEVICE