Uniden ANA9710 English Owners Manual - Page 15
Connecting the Telephone Cords 9, Connect to the LINE OUT Jack
View all Uniden ANA9710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Telephone Cords The ANA 9710 must be connected to an analog PBX port or a standard analog telephone line. CAUTION: n Never install telephone wiring during a lightning storm. n Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. n Use caution when installing or modifying telephone lines. You can also connect a standard 2500-type desk phone to the ANA 9710: Connect to the LINE OUT Jack 9
Connecting the Telephone Cords
The
ANA 9710
must be connected to an analog PBX port or a
standard analog telephone line.
CAUTION:
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
You can also connect a standard 2500-type desk phone to the
ANA 9710
:
9
Connect to the LINE OUT Jack