Uniden ANA9710 English Owners Manual - Page 26
Charging Spare Battery Packs 20, Low Battery Indicator 20
View all Uniden ANA9710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Charging Spare Battery Packs The Charger Unit of your ANA 9710 is equipped to charge the Spare Battery Pack with or without the Handset in the front slot. 1. Slide the Spare Battery Pack into the second slot in the Charging Unit until the retaining clip snaps over the top of the pack. 2. Make sure the BATT CHARGE indicator lights. If the BATT CHARGE indicator doesn't light, check to see that the AC Adapter is plugged in, and that the Battery Pack is making good contact with the Charging Unit charging contacts. Note: Charge the Battery Pack without interruption for 12-15 hours. 3. When charging is complete, press out on the latch and remove the Battery Pack for use. Or, if you don't need the Battery pack immediately, leave it in the Charging Compartment; it will not overcharge. Low Battery Indicator When the Battery Pack in the Handset is low and needs to be charged, you will see a message on the display. On a Call All keys and functions are available. Handset beeps once every 3 seconds Complete your call as quickly as possible Replace Battery pack within 20 seconds to continue call. In Standby Mode None of the buttons operate. Handset beeps every 15 seconds for 3 minutes. Cannot make or receive a call. Replace Battery Pack before making a call. Return the Handset to the Charging Unit for charging or replace the Handset Battery Pack with another charged Battery Pack. 20