Uniden ATLANTIS 270 English Owner's Manual - Page 14

Using the radio in scan mode xx To activate scan mode, press SCAN DUAL. xx You must have at least two channels in memory to start a scan. xx You cannot transmit while in scan mode. xx To save a channel into memory, select the channel, then press and hold the L/M/H MEM key. The MEM icon displays whenever you tune to that channel. xx To remove a channel from memory, set the radio to that channel, then press and hold the L/M/H MEM key. The MEM icon no longer displays. xx When the radio stays on a channel, press Channel Up to leave that channel and resume scanning. xx To end the scan, press the SCAN DUAL key again; the radio remains on the last scanned channel. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while in scan mode, the radio checks the most recently-used weather channel every seven seconds, then continues scanning the next channel in memory: Memory Channel Scan 08 10 11 12 13 14 15 17 20 24 25 Every few seconds, the radio checks the last-used weather channel, then scans the next channel. WX Alert Watch on wx Scan mode with Triple Watch or Dual Watch If you activate Triple Watch while operating in scan mode, the radio checks channels 9 and 16 every two seconds, then goes on to scan the next channel; with Dual Watch turned on, the radio only checks channel 16: E-10 Uniden Atlantis 270 Radio Owner's Manual