Uniden BC780XLT English Owners Manual - Page 27
Delay, Attenuator, Tone Data, Record, Auto Store
View all Uniden BC780XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2:DELAY Set a delay for the search ranges. This applies to all ranges (See CHANNEL DATASTEPS for details). 3:ATTENUATOR Set attenuation for all search ranges. (See CHANNEL DATA-ATTENUATOR for details). 4:TONE DATA The default mode is off. This means that you will receive all transmissions on any frequencies that are active within your search range(s). By selecting CTCSS or DCS you can set the radio to receive only a particular subaudible tone to be received during your search. You can also lockout a particular CTCSS or DCS tone. You may wish to do this if you want to search a range but not hear transmissions on any frequency that have particular subaudible tone. Note: Through the System Menu you can set the radio to operate in Tone Search mode during Search as well. In this mode, the radio will automatically determine the active subaudible tone on any frequency received during the Search. 5:RECORD With Record set to on, any frequency that is active, during the search, can be recorded to an external tape recorder. 6:AUTO STORE You can automatically store active frequencies found during a search into memory. You can select which bank you want to program the found frequencies. Note that the audio will be muted during Auto Store. 19