Uniden DCT5280 English Owners Manual - Page 56

• Normally, if the system remains idle for 10 seconds after /SELECT or /SELECT is pressed, the system will return to standby. However, for setting the time, the idle time is extended to two minutes. • Press and hold /SELECT or /SELECT to quickly scroll through the numbers on the display. • Time stamp will not be heard until you have set the time. Setting the Time Follow these steps to set the clock on the answering system to the correct time. 1) Press CLOCK/MENU. 2) Press /SELECT or /SELECT until the correct day is announced and the corresponding number (from " " Sunday to " " Saturday) appears. 3) Press SET to select the day. 4) Press /SELECT or /SELECT until you hear the correct hour setting. The numbers " " through " " appear on the base as each hour is announced. 5) Press SET to select the hour. 6) Press /SELECT or /SELECT until you hear the correct minute setting. The numbers " " through " " appears on the base as each minute is announced. 7) Press SET to select the minute. 8) Press /SELECT or /SELECT until you hear the correct AM or PM setting. The message counter displays " " or " ". 9) Press SET to select the AM/PM setting. A confirmation tone sounds, the day and time you set are announced for your review. Setting a PIN code To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code ( - ). To select a PIN code, perform the following steps: 1) Press CLOCK/MENU twice. The current PIN code appears on the base and it is announced. 2) Press /SELECT or /SELECT until the desired number appears. Press and hold /SELECT or /SELECT to quickly scroll through the numbers on the display. 3) Press SET to select the PIN code. A confirmation tone sounds, the system announces the new PIN code. [ 54 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E