Uniden DCT646 English Owners Manual - Page 54

note •If the party is busy or out of range, the handset returns to standby mode. •If any of the following occurs while selecting the other handset, the operation will be canceled. - Press talk/flash or speaker. - Receive an outside/ intercom call or page. •When the party does not answer within one minute, the operation is canceled. •Standby Mode The handset is not in use and talk/flash has not been pressed. 3-Way Conferencing The phone permits 3-way conversations between 2 handsets, and an outside line. 1) During a call, press talk/flash on another handset to initiate the 3-way conversation. 2) To remove either caller from your conversation, press end key on either handset. The other handset will still be connected to the call. Intercom/Call Transfer Feature If you have one or more extra handsets, you can enjoy an intercom call between handsets. Also, you can place an outside call on hold and transfer the call to another handset. Intercom 1) Press hold/transfer/int'com in standby mode. 2) Select the handset you want to talk with from the selection list within 30 seconds. To select the handset, press ring/vol/∧ or ring/vol/∨ and then press select/ . If you select All, all handsets will be paged. An intercom tone sounds. 6QKPVGTEQO *CPFUGV *CPFUGV 3) On the receiving handset, to answer the call, press talk/flash or hold/transfer/int'com. If you turn AutoTalk on, pick up the handset from the cradle. If Anykey Answer is on, press any number key, */tone/← or #/→. 4) To finish the intercom call, press end on either handset. [52] EXPANDING YOUR PHONE www.uniden.com