Uniden DECT1480-3 English Owners Manual - Page 21

If... Try... The system won't record messages. - Making sure the Record Time is not set to Announce Only. - Deleting messages (memory may be full). A handset can't access - Seeing if another handset is using the system. the answering system. - Making sure the phone is in standby. My outgoing message is gone. - If there was a power failure, you may have to re-record your personal outgoing message. I can't hear the base - Making sure call screening is turned on. speaker. - Changing the base speaker volume. Messages are incomplete. - The incoming messages may be too long. Remind callers to leave a brief message. - Deleting messages (memory may be full). When I answer on an extension, the phone - You may have to change the line mode. keeps ringing (or Contact Customer Service for instructions keeps recording.) Weak or Hard To Hear Audio If a caller's voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset's battery may be weak.  Try moving around while you're on a call or moving closer to the base to see if the sound gets louder.  Make sure the handset's battery is fully charged.  Try adjusting the earpiece volume. Do you use a T-Coil hearing aid? • If you have a hearing aid equipped with a telecoil (T-coil) feature, the interaction between the hearing aid & digital cordless phones can cause noise in the handset. If you have a Tcoil hearing aid & you have problems with noise on the line, try turning on T-coil mode. Open the menu. Select Handset Setup, then select T-coil. • Using T-coil mode can shorten the handset's talk time; make sure to watch the battery status and keep the battery charged. 21