Uniden DECT4066A-4R English Owners Manual - Page 27

Finding a Lost Handset, Using an Optional Headset

Get Uniden DECT4066A-4R PDF manuals and user guides View all Uniden DECT4066A-4R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

 When you get a Call Waiting call, the phone sounds a tone and displays any CID information received for the waiting call.  To answer a Call Waiting call, press FLASH on the base or TALK/ FLASH on a handset. The phone company automatically puts the current call on hold and switches you to the waiting call.  Use FLASH and TALK/FLASH to switch between the two calls; remember, each time you switch, there is a short pause before you're connected to the other caller. Finding a Lost Handset With the phone in standby, press INTERCOM/HOLD on the base. Select the handset you want to find, or select All to page all handsets at the same time. The paged handset(s) will beep for 1 minute or until you press INTERCOM/HOLD again or press TALK/FLASH followed by END on the handset. Using an Optional Headset You can use a standard 2.5 mm telephone headset with your cordless handsets. To purchase headsets, contact the Parts Department (see the front cover).  To install a headset, remove the headset jack cover and insert the headset plug into the jack.  Just make and receive calls as usual, and (Belt clip hole) use your headset to talk to the caller after the call connects.  When you connect a headset, the handset automatically mutes the earpiece and speaker. To re-activate the earpiece or speaker, just unplug the headset. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
25
When you get a Call Waiting call, the phone sounds a tone and
displays any CID information received for the waiting call.
To answer a Call Waiting call, press
FLASH
on the base or
TALK/
FLASH
on a handset. The phone company automatically puts the
current call on hold and switches you to the waiting call.
Use
FLASH
and
TALK/FLASH
to switch between the two calls;
remember, each time you switch, there is a short pause before
you're connected to the other caller.
Finding a Lost Handset
With the phone in standby, press
INTERCOM/HOLD
on the base. Select
the handset you want to find, or select
All
to page all handsets at the
same time. The paged handset(s) will beep for 1 minute or until you
press
INTERCOM/HOLD
again or press
TALK/FLASH
followed by
END
on
the handset.
Using an Optional Headset
You can use a standard 2.5 mm telephone
headset with your cordless handsets. To
purchase headsets, contact the Parts
Department (see the front cover).
To install a headset, remove the headset
jack cover and insert the headset plug into
the jack.
Just make and receive calls as usual, and
use your headset to talk to the caller after the call connects.
When you connect a headset, the handset automatically mutes
the earpiece and speaker. To re-activate the earpiece or speaker,
just unplug the headset.
(Belt clip
hole)