Uniden DECT4066A-4R English Owners Manual - Page 44

Important Information Terms Used In This Guide Accessory An extra handset that can register to and be used with an expandable phone base. All Handset accessory handsets must be registered to a base. Base The main part of the phone. It connects to your phone line and lets you make and receive calls. Most bases also have a cradle to store a handset. CIDCW (CID on Call Waiting.) A service that shows CID for calls that come in during another call. Call Waiting A service that lets you receive calls while you are on another call. Caller ID (Also called CID.) A service that shows the name and number of incoming callers. Charger Cradle A cradle that stores and charges a handset but doesn't connect to the phone line. The part of the phone that stores a handset. While in a cradle, a handset is always in standby, and any keys are locked. During a call The station is currently on a call or has activated a dial tone. Handset In standby Line 1 and Line 2 Off hook Soft key Station A cordless handset that you use to dial the phone and talk to callers. The phone is inactive: there is no dial tone, no station is on a call or listening to messages. On a two-line jack, line 1 is connected to the inner pair of wires, and line 2 is connected to the outer pair of wires. If you want to switch the lines, contact your phone company. On single-line jacks, line 1 is connected to TEL LINE 1/2, and line 2 is connected to TEL LINE 2. You can switch Line 1 and Line 2 just by swapping the connectors. The phone is connected to an outside line: there is a dial tone or an ongoing call. A software-controlled button that can change its function to fit the current operation. Any handset or the base. Specifications Base Charger  Use only the supplied AC AC Part number PS-0034 PS-0035 adapter Input voltage 120V AC, 60 Hz 120V AC, 60 Hz Output voltage 7.8V AC @ 450mA 8V AC @ 300mA adapters.  Be sure to use the proper adapter for the base and any chargers.  Do not place the power cord Battery Part number BT-1018 pack Capacity 500mAh, 2.4V DC where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.  Do not place the base in direct sunlight or subject it to high temperatures. Battery Information  Fully charged, the battery should provide about 10 hours of talk time and about 7 days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged.  Keep an eye on the battery status icon. When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate.