Uniden DRX402A English Owner's Manual - Page 9

3. Watch the signal strength icon on the handset. Make a note where the icon drops from 4 bars to 3 bars. 4. Continue walking away from the base. Make a note where the signal strength icon drops from 3 bars to 2 or if you start to hear noise on the line (which indicates the signal is getting weaker). 5. Place the charger anywhere inside the range where the signal strength icon showed 3 bars and the handset had a clear signal with no noise. Testing the location Connect the charger's AC adapter and make sure the Link light comes on steadily. If the light flashes, the MULTIRANGETM charger is not getting a good signal from the base. The charger may be too far away from the base, there may be interference from electronic devices, or the signal might be blocked by thick walls or metal objects. Try moving the charger to another location. Wall Mounting the MULTIRANGETM charger If you want mount the charger on the wall, you need to adjust the desk stand: 1. Pull the locking tab up and back (see the black arrow in the illustration to the right), and slide the desk stand straight off. 2. Flip the stand over so the locking tabs that say wall are facing the charger with the arrows pointing down. 9