Uniden HOMEPATROL-1 English Owner's Manual - Page 32

BATTERY AND POWER INFORMATION HomePatrol‐1 comes with an AC adapter to connect the unit to an AC power source and a DC adapter for use in your automobile. In addition, HomePatrol‐1 also requires four (4) AA Alkaline or NiMH rechargeable batteries (one set of four NiMH rechargeable batteries is included with the unit). NOTE: These rechargeable batteries do not require a recharging station; you can leave them in the unit and select to recharge them when HomePatrol‐1 is connected to AC power. Installing the Batteries From the back of the HomePatrol‐1 unit:  Slide the battery cover lock to the right to unlock the battery cover.  Press and push down on the center to disengage the battery cover.  Insert the batteries according to the directional label inside.  Replace and relock the battery cover. Recharging the Batteries The rechargeable batteries included with HomePatrol‐1 are 2300 mAh. You can set how long it will take to recharge a battery from a drained state to a fully charged state through the Set Charge Time menu on the Advanced Menu. Then, when you connect HomePatrol‐1 to a power source and allow battery charging, HomePatrol‐1 uses that data to charge the batteries. HomePatrol will charge the batteries whether or not the unit is turned on, in standby mode, or powered off. 27