Uniden HOMEPATROL-2 Owner s Manual - Page 28

NOTE: Record will not work when the battery is low or not installed, regardless of HomePatrol‐II being connected to AC power. How to Record Transmissions 1. On the Main screen, tap Record. A Recording Started confirmation screen displays. 2. Tap OK to accept recording or Cancel to take no action before returning to monitoring transmissions. 3. When you return to monitoring, the Record status indicator changes from a white circle to red. How to Stop Recording Transmissions 1. On the Main screen, tap Record. A Recording Stopped confirmation screen displays. 2. Tap OK to stop recording or Cancel to take no action and continue to record transmissions. 3. If you tap OK, HomePatrol‐II asks if you would like to save the recorded files. 4. Tap OK to save the recorded files or No to delete the recorded files. Either selection will take you back to HomePatrol‐II to monitor transmissions. 5. When you return to monitoring transmissions you will see that the Record status indicator has changed from red to white. How to Play Back a Recorded Session You can play back any sessions you've recorded. 1. Tap and hold Record on the Feature Navigation bar. The Review Recordings screen displays. NOTE: You can also access the Review Recordings screen by tapping Menu/Advanced Menu/Replay Options/Review Recordings. The same Review Recordings screen displays. 2. Tap on a recording session to replay. The Recording Session screen displays the following:  Play Session  Delete Session  Rename Session 3. Tap Play Session and then OK. HomePatrol‐II displays the identifying data of each recorded transmission as it is replayed. When all recorded transmissions have been replayed, HomePatrol‐II asks if you would like to replay the transmissions. Tap Yes or No.  If you tap Yes, HomePatrol‐II plays back those same recordings and then displays the same Play Again screen.  If you tap No, HomePatrol‐II returns to the Review Recordings list. Weather With HomePatrol‐II, you can monitor specific weather channels from NOAA or set the scanner to listen for weather alerts. NOTE: When HomePatrol‐II is in Weather Alert Standby mode, it cannot receive other transmissions. Tap Listen to return to monitoring. Monitoring Weather Channels When you select Monitor NOAA Weather (Menu/Weather Mode), HomePatrol‐II displays a weather channel. Tap UP or DOWN arrows until you can hear a local weather broadcast. 22