Uniden TCX440 English Owners Manual - Page 5
menu/select - battery for
UPC - 050633260302
View all Uniden TCX440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
For Backward Compatible Base Models - ELT560 and the TRU8 Series [TRU8860/TRU8865/TRU8880/TRU8885/TRU8888] 1 Disconnect the AC adapter from the main base. 2 While pressing down on the following key, reconnect the AC adaptor. TRU8860/8865 models - find handset key TRU8880 models - find hs/intercom key TRU8885 models - flash/find hs key Keep pressing the key until the CHARGE LED starts to blink. For ELT560 1 Remove the battery compartment cover from the back of the main base. 2 Press and hold the Registration button in the battery compartment. 3 Keep pressing the Registration button until the handset charge LED on main base starts to blink. Registration button For TRU8888 (corded base model) 1 With the main base in standby mode (i.e. not being used), press the MENU soft key on the base. 2 Use the up/down key to select HS Registration, and then press the OK soft key. 3 Use the up/down key to select Register Handset. 4 Base LCD screen will display the following prompt: On handset press & hold "#" key for 2 sec 3 On the handset, press and hold the # key until you hear a beep. For Main Base Models ELBT585, ELBT595 1 With the main base in standby mode (i.e. not being used), press menu/select. 2 Use the up/down key to select System Setup. 3 Use the up/down key to select Register Handset. 4 The base LCD screen will display the following prompt: On handset, press & hold "#" key for 2 sec 5 On the handset, press and hold the # key until you hear a beep. - 5 -