Uniden TRU9385-2 English Owners Manual - Page 15
Installing the Belt Clip, Connecting the Base and Charging the Handset, To remove the belt clip
UPC - 050633260913
View all Uniden TRU9385-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Belt Clip Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. To remove the belt clip, pull either side of the belt clip to release the tabs from the holes. Connecting the Base and Charging the Handset ) Connect the AC adapter (AD-800) to the DC IN 9V jack. 2) Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. 3) Place the handset in the base with the LCD screen facing forward. 4) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts. Route the cord. To AC outlet 5) Charge your handset at least 15 to 20 hours before plugging into the phone line. To DC IN 9V AC adapter (supplied) Caution: To avoid risk of fire and shock, only use the Uniden AD-800 AC adapter. 14