Uniden TRU9385-2 English Owners Manual - Page 35

Using Hold, Conference and Transfer Placing a Call on Hold ) During a call, press [hold/int'com/xfer] on the handset, or [hold/int'com] on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold. 2) To return to the party on hold, press [ /flash] or [ ] on a handset or [ ] on the base. The phone will return to the holding party. Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party's line will be disconnected and the phone will return to standby. • While a call is on hold, Caller ID and Call Waiting cannot be received. Conferencing If you have more than one handset, up to four people can participate in a conference call. A four-way conference call consists of an outside line, the base speaker phone, and two handsets. You can easily join a call already in progress. ) From the handset, press [ /flash] or [ ] to join the call. From the base, press [ ]. 2) To hang up, return the handset to the cradle or press [ ] on the handset. On the base, press [ ]. The other party will still be connected to the call. Transferring a Call You can transfer a call from one station to another. From the handset: ) During a call, press [hold/int'com/xfer]. 2) Use [ ] or [ ] to select the station you want to transfer the call to, then press [select/ ]. Select ALL to page all other station. The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press [ /flash] or [ ]. 3) When another station accepts the transferred call, you will be disconnected. If you want to rejoin the call, press [ /flash] again or [ ]. 34