Via EPIA-M10000G User Manual - Page 18

DDR SDRAM Module Installation Procedures - epia m

Get Via EPIA-M10000G - VIA Motherboard - Mini ITX PDF manuals and user guides View all Via EPIA-M10000G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Chapter 2 MEMORY MODULE INSTALLATION The VIA EPIA-M Mini-ITX Mainboard provides one 184-pin DIMM slot for DDR266 SDRAM memory modules. DDR SDRAM Module Installation Procedures 1. Push the white retaining latches at either end of the DIMM slot outwards. 2. Align the DDR SDRAM module with the corresponding notches on the DIMM slot. The modules will only fit if placed in the correct position. 3. With both hands, press the DDR SDRAM module down into the DIMM slot so that the white retaining latches rotate up and secure the module in place (see picture below). 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Chapter 2
10
M
EMORY
M
ODULE
I
NSTALLATION
The VIA EPIA-M Mini-ITX Mainboard provides one 184-pin DIMM slot for
DDR266 SDRAM memory modules.
DDR SDRAM Module Installation Procedures
1.
Push the white retaining latches at either end of the DIMM slot outwards.
2.
Align the DDR SDRAM module with the corresponding notches on the
DIMM slot. The modules will only fit if placed in the correct position.
3.
With both hands, press the DDR SDRAM module down into the DIMM
slot so that the white retaining latches rotate up and secure the module
in place (see picture below).