Via EPIA-ML6000EAG User Manual - Page 39

BIOS Setup IDE Primary Master/Slave, Secondary Master/Slave Press Enter to enter the sub-menu and the following screen appears: IDE HDD Auto-Detection Phoenix - AwardBIOS CMOS Setup Utility IDE Primary Master [Press Enter] Item Help IDE Primary Master Access Mode Capacity [Auto] [Auto] 0 MB Menu Level To auto-detect the HDD's size, head... channel Cylinder 0 Head 0 Precomp 0 Landing Zone 0 Sector 0 PIO Mode Ultra DMA Mode [Auto] [Auto] : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General F7: Optimized Defaults Help The specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. Select Auto whenever possible. If you select Manual, make sure the information provided is from your hard disk vendor or system manufacturer. IDE Access Mode Capacity Cylinder Head Precomp Landing Zone Sector PIO Mode Ultra DMA Mode The name of this menu item will match the name of the menu. The settings are None, Auto, Manual. The settings are CHS, LBA, Large, Auto. The formatted size of the storage device. Number of cylinders. Number of heads. Write precompensation. Cylinder location of the landing zone. Number of sectors. The settings are Mode 0/1/2/3/4, Auto. The settings are Disabled and Auto. 3-7