Via EPIA-ML6000EAG User Manual - Page 45

Integrated Peripherals BIOS Setup SuperIO Device Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals [Press Enter] Item Help Onboard IDE Channel 1 Onboard IDE Channel 2 IDE Prefetch Mode Display Card Priority Frame Buffer Size AC97 Audio MC97 Audio VIA OnChip LAN [Enabled] [Enabled] [Enabled] [PCI Slot] [32M] [Auto] [Auto] [Enabled] Menu Level USB Keyboard Support Onboard LAN Boot ROM Onboard Fast IR Fast IR IRQ Fast IR DMA [Disabled] [Enabled] [Disabled] --- : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General F7: Optimized Defaults Help Onboard IDE Channel 1/2 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Choose Enabled to activate each channel separately. Settings: Enabled and Disabled IDE Prefetch Mode This allows your hard disk controller to use the fast block mode to transfer data to and from the hard disk drive. Block mode is also called block transfer, multiple commands or multiple sector read/write. Enabled enables IDE controller to use block mode; Disabled allows the controller to use standard mode. Settings: Enabled and Disabled Display Card Priority This setting specifies which VGA card is your primary graphics adapter. Settings: PCI Slot and AGP Frame Buffer Size This setting instructs the BIOS to reserved the specified amount of memory for the internal video controller. Settings: 16M, 32M, 64M 3-13